Subject	swap a coil pack from a working cylinder
Posted by	Ahmed (Chicago) on March 10, 2010 at 8:02 AM
	This message has been viewed 151 times.
In Reply To	I have found posts on how to check for bad injectors> posted by BrianTT(Tpa,Fl) on March 10, 2010 at 07:45 AM
Message	into the cylinder that is misfiring...if it doesn't fire, then that tells you it is something else (most likely an injector if you still have old style injectors) Professional Photoshoot of my Z
Follow Ups	I have found posts on how to check for bad injectors> - BrianTT(Tpa,Fl) 07:45:29 03/10/10 swap a coil pack from a working cylinder - Ahmed (Chicago) 08:02:17 03/10/10 coils should ohm around .7 (n/m) - Paulym1111 08:08:26 03/10/10 Where do I check? At the coil or ECU? (n/m) - BrianTT(Tpa,Fl) 08:11:13 03/10/10 check the ohm's from the pins on the coil pack itself.. - Paulym1111 09:40:01 03/10/10 Thanks for the info! (n/m) - BrianTT(Tpa,Fl) 09:58:55 03/10/10 I think it's better to actually run them and look for a - jzack 18:55:44 03/10/10
Post a Followup	You cannot reply to this message because you are not logged in.