Subject	Re: Wont go into gear
Posted by	pooldog on February 22, 2010 at 8:02 AM
	This message has been viewed 617 times.
In Reply To	Wont go into gear posted by mkspriggs on February 20, 2010 at 04:51 PM
Message	This is a long shot but it happened to me. I bought a car that I couldn't get into gear while the car was running. Long story short...one of the bolts for the clutch fell behind the springs and kept the pressure plate against the flywheel. I had to pull the trans and clutch. Now its fine.
Follow Ups	Wont go into gear - mkspriggs 16:51:05 02/20/10 With the car off pump the pedal enough to get it into - ShakaShaun(Denver) 16:57:14 02/20/10 There's air still in the system -- if the pedal gets hard - jzack 16:58:31 02/20/10 Re: There's air still in the system -- if the pedal gets hard - mkspriggs 19:01:59 02/20/10 You might have a problem at the pivot ball of the fork>> - ZUL8TR 06:52:43 02/21/10 Get under the car and have someone work the clutch. - Gordo 93TT Daytona 19:00:55 02/21/10 Re: Get under the car and have someone work the clutch. - mkspriggs 21:09:15 02/21/10 Re: Get under the car and have someone work the clutch. - mkspriggs 21:20:12 02/21/10 Somebody help me here... I am pretty certain you can get a - Gordo 93TT Daytona 22:13:18 02/21/10 As I stated above and you note the rubber boot can >>> - ZUL8TR 06:14:05 02/22/10 As many have said already it sounds like the pivot ball. - 5280Z_nightstalker 23:19:53 02/21/10 Re: Wont go into gear - pooldog 08:02:01 02/22/10 Finding a clutch bolt had fallen behind the finger springs - Gordo 93TT Daytona 17:48:22 02/22/10 mkspriggs - are you doing this work yourself? - Gage 09:30:02 02/24/10 Re: mkspriggs - are you doing this work yourself? - mkspriggs 17:54:57 02/24/10 Re: Finding a clutch bolt had fallen behind the finger springs - pooldog 08:54:47 02/27/10
Post a Followup	You cannot reply to this message because you are not logged in.