Subject	Clutch question.
Posted by	not-hrz on February 20, 2010 at 5:21 PM
	This message has been viewed 108 times.
Message	I had new clutch master and slave cylinders replaced 2K miles ago (about 10 months). After installation, sometimes when trying to start, I noticed that I would have to push the clutch pedal hard all the way to the floor in order to start. After sitting for a couple of weeks I wanted to take the car out for a spin. When I pushed the clutch in to start, there was no pressure. I checked the reservoir to find the fluid was at the bottom which I then filled. After filling, there still was no pressure--probably air in lines. I don't see any leak marks in the car or on the floor. Could these be related problems or separate issues? I'm taking the car back to the shop, but I would like opinions first. The shop is reputable and has been working on Z cars for many years.
Follow Ups	Clutch question. - not-hrz 17:21:24 02/20/10 Re: Clutch question. - mkspriggs 20:34:22 02/20/10 fluid leak at slave and/or master at shaft. Look >> - ZUL8TR 09:51:48 02/21/10 If you are losing fluid and you have a SS line check the SS - 5280Z_nightstalker 23:33:45 02/21/10
Post a Followup	You cannot reply to this message because you are not logged in.