Subject	The white lines on the timing belt are only for initial>>>
Posted by	ZUL8TR on February 17, 2010 at 12:33 PM
	This message has been viewed 133 times.
In Reply To	I would agree. If you are getting strange readings with posted by Audioquest on February 17, 2010 at 10:40 AM
Message	install of belt for conveinent teeth count and offer no use for checking the proper timing of the belt. The important marks are the dimples on the 4 cam pullies and the crank pully lining up with the permanent marks on the backing plate at TDC of the # 1 cylindere on the compression stroke. ZUL8TR in Orlando,FL
Follow Ups	timing woe's - ZPUHost 20:44:29 02/15/10 Re-check using the coil pack wires going to cylinder - jzack 22:42:20 02/15/10 My car has an underhood OEM sticker showing that >>> - ZUL8TR 06:29:35 02/16/10 2nd. that's the only way my timing light picks it up. (n/m) - KasbeKZ(VA) 08:40:08 02/16/10 The CP connector wire harness is what I use and my - Audioquest 08:58:40 02/16/10 Re: The CP connector wire harness is what I use and my - ZPUHost 17:15:02 02/16/10 Only way to know for sure on the belt is to pull the - jzack 19:09:42 02/16/10 Try the procedure I suggest above B4 anything major (n/m) - ZUL8TR 06:02:34 02/17/10 I would agree. If you are getting strange readings with - Audioquest 10:40:25 02/17/10 The white lines on the timing belt are only for initial>>> - ZUL8TR 12:33:44 02/17/10 The white lines are meant to line up with the dimples on - Audioquest 08:53:13 02/18/10 Of course the number of teeth between the marks on the >>l - ZUL8TR 11:17:13 02/18/10 Yeah, that's all I was getting at. A lot of people try to - Audioquest 11:58:28 02/18/10 Re: Yeah, that's all I was getting at. A lot of people try to - ZPUHost 23:46:07 02/20/10
Post a Followup	You cannot reply to this message because you are not logged in.