Subject	My car has an underhood OEM sticker showing that >>>
Posted by	ZUL8TR on February 16, 2010 at 6:29 AM
	This message has been viewed 153 times.
In Reply To	Re-check using the coil pack wires going to cylinder posted by jzack on February 15, 2010 at 10:42 PM
Message	exact procedure using a short piece of spark plug wire from the lifted out coil to the spark plug and clipping the inductive pick up of the timing light on this short wire. ZUL8TR in Orlando,FL
Follow Ups	timing woe's - ZPUHost 20:44:29 02/15/10 Re-check using the coil pack wires going to cylinder - jzack 22:42:20 02/15/10 My car has an underhood OEM sticker showing that >>> - ZUL8TR 06:29:35 02/16/10 2nd. that's the only way my timing light picks it up. (n/m) - KasbeKZ(VA) 08:40:08 02/16/10 The CP connector wire harness is what I use and my - Audioquest 08:58:40 02/16/10 Re: The CP connector wire harness is what I use and my - ZPUHost 17:15:02 02/16/10 Only way to know for sure on the belt is to pull the - jzack 19:09:42 02/16/10 Try the procedure I suggest above B4 anything major (n/m) - ZUL8TR 06:02:34 02/17/10 I would agree. If you are getting strange readings with - Audioquest 10:40:25 02/17/10 The white lines on the timing belt are only for initial>>> - ZUL8TR 12:33:44 02/17/10 The white lines are meant to line up with the dimples on - Audioquest 08:53:13 02/18/10 Of course the number of teeth between the marks on the >>l - ZUL8TR 11:17:13 02/18/10 Yeah, that's all I was getting at. A lot of people try to - Audioquest 11:58:28 02/18/10 Re: Yeah, that's all I was getting at. A lot of people try to - ZPUHost 23:46:07 02/20/10
Post a Followup	You cannot reply to this message because you are not logged in.