Subject	Re: Use a digital voltmeter - on resistance setting and verify
Posted by	ZaddicteD on January 30, 2010 at 3:03 PM
	This message has been viewed 80 times.
In Reply To	Use a digital voltmeter - on resistance setting and verify posted by jzack on January 30, 2010 at 02:41 PM
Message	:the coil resistance falls between 10 and 14 ohms... :They still can go bad -- but this at least verifies they are in spec.... ah ok. well I guess Ill check them out. but are these injectors really that bad and fail out?or not necessarily?
Follow Ups	How to check if injectors are good.. - ZaddicteD 13:59:32 01/30/10 Use a digital voltmeter - on resistance setting and verify - jzack 14:41:25 01/30/10 Re: Use a digital voltmeter - on resistance setting and verify - ZaddicteD 15:03:00 01/30/10 If I remember correctly -- they seem to be OK but not - jzack 09:07:03 01/31/10 Inspect the connectors for green corrosion and clean>> - ZUL8TR 16:07:37 01/31/10
Post a Followup	You cannot reply to this message because you are not logged in.