Subject	Use a digital voltmeter - on resistance setting and verify
Posted by	jzack on January 30, 2010 at 2:41 PM
	This message has been viewed 80 times.
In Reply To	How to check if injectors are good.. posted by ZaddicteD on January 30, 2010 at 01:59 PM
Message	the coil resistance falls between 10 and 14 ohms... They still can go bad -- but this at least verifies they are in spec....
Follow Ups	How to check if injectors are good.. - ZaddicteD 13:59:32 01/30/10 Use a digital voltmeter - on resistance setting and verify - jzack 14:41:25 01/30/10 Re: Use a digital voltmeter - on resistance setting and verify - ZaddicteD 15:03:00 01/30/10 If I remember correctly -- they seem to be OK but not - jzack 09:07:03 01/31/10 Inspect the connectors for green corrosion and clean>> - ZUL8TR 16:07:37 01/31/10
Post a Followup	You cannot reply to this message because you are not logged in.