Subject	Innovate Wideband with LC-1 and SSI-4 interface
Posted by	hijack on January 28, 2010 at 3:10 PM
	This message has been viewed 166 times.
Message	I'm interested in getting a wideband setup to do some of my own tuning. I did alot of research and quite a few searches on this site, but am not getting the info i need. Has anyone successfully setup the innovate (with SSI-4 controller) system in their Z? I currently have an SAFCII and was wondering if it was possible to tap into the existing signal wires going to the safc to be able to log rpm, throttle position and boost. I also have a separate EGT sensor that i would like to be able to connect to the SSI-4 controller and log as well. Is it very difficult or fairly straight forward? Thanks.
Follow Ups	Innovate Wideband with LC-1 and SSI-4 interface - hijack 15:10:23 01/28/10 EGT sensor won't work on the SSI-4 - aliaZ 21:11:15 01/28/10 is an EGT sensor necessary for tuning - hijack 07:09:34 01/29/10 Required? No. Useful? Sure. - yobobrox 09:14:57 01/29/10
Post a Followup	You cannot reply to this message because you are not logged in.