Subject	The turbine housing is slightly different
Posted by	Broke_as_**** on January 27, 2010 at 12:48 AM
	This message has been viewed 129 times.
In Reply To	Re: Yes. Pic Here. posted by starscream714 on January 26, 2010 at 11:44 PM
Message	You really couldn't tell just by looking at it. However if you look just inside the turbine inlet the A/R ratio should be stamped into the side towards the outlet flange. Or it should be on the outside, just below the inlet flange on the side facing the center housing. .63 is manual, .54 is auto.
Follow Ups	What size are the stock size turbos for manual? - starscream714 16:34:11 01/26/10 Yes. Pic Here. - ZTurboFan 23:19:13 01/26/10 Re: Yes. Pic Here. - starscream714 23:44:21 01/26/10 The turbine housing is slightly different - Broke_as_**** 00:48:50 01/27/10 Re: The turbine housing is slightly different - starscream714 01:56:39 01/27/10 Yes, they'll work fine - Broke_as_**** 08:36:29 01/27/10
Post a Followup	You cannot reply to this message because you are not logged in.