Subject	this is how
Posted by	fcz32 on January 15, 2010 at 1:13 PM
	This message has been viewed 137 times.
In Reply To	How do I clean the green corrosion from inside electrical posted by aeron8 on January 15, 2010 at 10:27 AM
Message	You can buy some electrical cleaner, spray it on, and then lightly scrape off the green stuff with a flat head or anything else you can find. Make sure to get rid off the green stuff from both the connector and where the connector connects. Once youre done make sure you let the connectors completely dry and then feel free to put electric grease on them for better conductivity and to prevent future corrosion. Oh and make sure you do all of this with the battery disconnected. P.S. Cleaning one of my injectors like this solved my problem when i was running on only 5 cylinders because the connector was too dirty.
Follow Ups	How do I clean the green corrosion from inside electrical - aeron8 10:27:52 01/15/10 You cut them off and replace them because in most >>> - ZUL8TR 12:47:16 01/15/10 2nd - if these are more than a few years old, very - jzack 17:15:11 01/15/10 Re: How do I clean the green corrosion from inside electrical (n/m) - fcz32 12:58:49 01/15/10 this is how - fcz32 13:13:36 01/15/10 This works if corrosion did not migrate up the harness >>> - ZUL8TR 14:42:11 01/15/10 Replacing the connector is always best if it's really - Audioquest 09:37:38 01/17/10 Thanks guys - aeron8 01:18:07 01/18/10
Post a Followup	You cannot reply to this message because you are not logged in.