Subject	Re: Voltage good on harness
Posted by	ZmanRob on January 05, 2010 at 10:07 PM
	This message has been viewed 116 times.
In Reply To	It wouldn't make sense for fuel to only get to one posted by jzack on January 05, 2010 at 09:39 PM
Message	Checked voltage for injectors coming from harness->12.78v I know each of the injectors are clicking. They are all new (along with the connectors) and I checked each with the CAS removed to turn and utilizing the old screwdriver method. A definite click was there for each.
Follow Ups	Spark-good, Injector-clicking, plug-dry, Missing driver side - ZmanRob 21:11:22 01/05/10 It wouldn't make sense for fuel to only get to one - jzack 21:39:22 01/05/10 Re: Voltage good on harness - ZmanRob 22:07:48 01/05/10 What about injector clicking when engine running? >> - ZUL8TR 05:32:29 01/06/10 Re: Injectors kicking, Coils ohm'n, Spark sparkin...still - ZmanRob 20:10:51 01/06/10 Did you over oil the pop charger filter and possibly >>> - ZUL8TR 06:04:29 01/07/10 Re: Injectors kicking, Coils ohm'n, Spark sparkin...still - ZmanRob 21:31:31 01/06/10 I know you said the injectors were new, but did you ohm test - Haasz32 15:38:56 01/08/10 Have you tried checking your manifold vacuum pressure? - canyoncarver 06:59:29 01/07/10 Agreed. Do a vacuum test. (n/m) - Haasz32 15:33:56 01/08/10 It sounds like either a bad injector(s) or a vacuum leak. (n/m) - Haasz32 15:35:29 01/08/10 Re: Spark-good, Injector-clicking, plug-dry, Missing driver side - CmyZ 22:37:58 01/07/10
Post a Followup	You cannot reply to this message because you are not logged in.