Subject	Re: STILL having post plenum pull issues...
Posted by	ZTurboFan on December 13, 2009 at 8:22 PM
	This message has been viewed 99 times.
In Reply To	STILL having post plenum pull issues... posted by arkansasturbo on December 13, 2009 at 07:56 PM
Message	The only thing I see that stands out as wrong is the TPS voltage under WOT. IMO it should be 4.0+ I know you've tested the MAF too, but does the voltage read out from your BlaZt align with what it should be at idle? Any chance of a start-up video until it stalls out. Which presumably is pretty quick?
Follow Ups	STILL having post plenum pull issues... - arkansasturbo 19:56:44 12/13/09 Have you preformed a normal boost leak test? (n/m) - jobambo 20:09:33 12/13/09 Re: STILL having post plenum pull issues... - ZTurboFan 20:22:16 12/13/09 Have performed multiple boost leak tests, all good - arkansasturbo 20:39:20 12/13/09 Just so I understand... - ZTurboFan 21:15:31 12/13/09 That is correct - arkansasturbo 21:22:44 12/13/09 Here's the weird thing...Runs perfect with 02 sensors unhook - twinturbineZ 23:34:02 12/13/09 I think i might know what it is - jobambo 05:17:03 12/14/09 wuth the maf and ds o2 sensor connected, the car idles - arkansasturbo 14:11:48 12/14/09 Seems obvious... - ZTurboFan 15:34:35 12/14/09 Re: STILL having post plenum pull issues... - craigz96tt 08:58:50 12/14/09 Yeah, maybe compare BlaZt logs... - ZTurboFan 09:42:27 12/14/09 Well I just got back from out at the Z... - arkansasturbo 17:07:56 12/14/09 Did you ever swap a 555 ecu? While it could be the O2 - doug8867 07:35:22 12/15/09 no i haven't yet, although i find it unlikely that the two - arkansasturbo 12:32:01 12/15/09
Post a Followup	You cannot reply to this message because you are not logged in.