Subject	You need to install the TT pump onto the 2+2 bulkhead assy.
Posted by	Bernie (NoVA) on January 24, 2009 at 1:01 AM
	This message has been viewed 296 times.
In Reply To	Fuel Pump Question on 2+2 NA -> 2+2 TT Conversion posted by Nick(CT) on January 24, 2009 at 12:02 AM
Message	To use the TT controller you have to also be using a TT ECU module (not just a TT chip in a NA Module) If you are using a TT chip in NA - use your NA controller. If you are using a TT chip in a TT ecu - you can use the TT controller. You will need to add a wire to the controller connector on your cars chassis harness. Depending on what EFI harness you are using (TT or NA) and IF your body harness is wired for it (Adam's 93 NA Vert had the wire already in it) so when we installed a 95 EFI the TT controller was a simply plug & play. Otherwise you run a wire from the ECU connector to the pump controller. SILVER HI Overdrive Water Pump Pulleys Are Here! Bernie Bilski berniebilski@cox.net 1995 Nissan 300ZX TwinTurbo in Cobalt Green 1997 Nissan 240SX SE in Ultra Red 1995 Nissan Pick-Up XE in Super Black ZCCNV #390 ~ ECZA #368 Need SERVICE, DIAGNOSTICS, or PARTS in the NoVA/DC/MD area? Please email me or check out my current inventory.
Follow Ups	Fuel Pump Question on 2+2 NA -> 2+2 TT Conversion - Nick(CT) 00:02:33 01/24/09 You need to install the TT pump onto the 2+2 bulkhead assy. - Bernie (NoVA) 01:01:07 01/24/09 Thank You! (n/m) - Nick(CT) 11:45:44 01/24/09 Re: Fuel Pump Question on 2+2 NA -> 2+2 TT Conversion - WazTTed 01:43:54 01/24/09
Post a Followup	You cannot reply to this message because you are not logged in.