TwinTurbo.NET: Nissan 300ZX forum - ...
People Seeking Info
 
   


     
Subject ...
     
Posted by Drk93TT on October 05, 2008 at 10:14 AM
  This message has been viewed 215 times.
     
In Reply To Idle/Misfire? posted by pearl90ttz on October 04, 2008 at 03:42 PM
     
Message have you checked/cleaned the coolant temp sensor (yellow connector behind fan), and the black one too, clean both.

check your MAF connector and clean also.

If you have a new style PTU it will be black plastic, with no metal cooling fins.... the older one is metal and had cooling fins on it. clean the connections.

I had a similar start and stall problem a few months ago, I cleaned the coolant temp. yellow sensor and next time I drove it it did what you describe... happend once, has not happened again since I cleaned it better with a small wire brush, and used a bit of dielectric grease

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.