Subject	My results on TPS.
Posted by	96300NAZ on September 22, 2008 at 5:29 PM
	This message has been viewed 305 times.
In Reply To	Suggest checking doing the simple cheap things first to > posted by ZUL8TR on September 19, 2008 at 08:30 PM
Message	The continuity on the switch checks out fine. The switch on a 96 is different than that of the one in the tutorial, However, going by the tutorial i've measured across the orange/blue - black = 5v Black - Black = 0v Sensor plugged in, ING on: (This was measured via the plug to the TPS, which does have red/white/black) White to ground at closed position = 5v. It does not change or fluctuate regardless of what position the throttle is at. I have not attempted to adjust it because it is so far out of spec and it didnt fluctuate.
Follow Ups	Problems with Idle/Hesitation/Surge under 3k rpm - 96300NAZ 13:42:57 09/19/08 Re: Problems with Idle/Hesitation/Surge under 3k rpm - scottacc 15:09:48 09/19/08 I'm having a similar problem - bt300z32 18:42:00 09/19/08 Suggest checking doing the simple cheap things first to > - ZUL8TR 20:30:39 09/19/08 My results on TPS. - 96300NAZ 17:29:28 09/22/08 I also found 5v across the white to black (n/m) - 96300NAZ 08:05:39 09/23/08 Re: Problems with Idle/Hesitation/Surge under 3k rpm - KasbeKZ 22:31:05 09/19/08
Post a Followup	You cannot reply to this message because you are not logged in.