Subject	The year of the harness doesn't matter to the ECU
Posted by	na300zx (OH) on September 21, 2008 at 8:44 AM
	This message has been viewed 95 times.
In Reply To	Is replacement harness an exact production match for>> posted by ZUL8TR on September 21, 2008 at 06:25 AM
Message	As long as he has all of the proper parts (right style CAS, injectors...) it is fine. ricerdaddy: If you look at the white connector, the yellow/green wire that goes next to the yellow/red wire stays right next to it in the bundle. If you look where the wires disappear, you can confirm whether you mixed them up. If the yellow/green wires are running at an angle to get to their places they are probably backwards. Next time you do a harness, take a piece of electrical tape and tape the two (yellow/red and yellow/green) together and you won't be able to confuse them.
Follow Ups	Injectors will not fire need help - ricerdaddy 20:00:04 09/20/08 Ohm the injectors and check fuel pressure - 550HPTT 22:19:42 09/20/08 Re: Ohm the injectors and check fuel pressure - ricerdaddy 22:51:21 09/20/08 swap in a known good cas to check it (n/m) - CWRaab(philly) 08:57:44 09/21/08 did that also no fuel. - ricerdaddy 14:39:50 09/21/08 make sure the harness is seated in the ecu firmly. (n/m) - CWRaab(philly) 22:43:24 09/20/08 already did that. (n/m) - ricerdaddy 14:41:19 09/21/08 Is replacement harness an exact production match for>> - ZUL8TR 06:25:16 09/21/08 The year of the harness doesn't matter to the ECU - na300zx (OH) 08:44:31 09/21/08 will check on that - ricerdaddy 14:42:06 09/21/08
Post a Followup	You cannot reply to this message because you are not logged in.