Subject	wheel/brake problem question help
Posted by	ouikikazz on September 17, 2008 at 9:31 PM
	This message has been viewed 143 times.
Message	ok so i am running some gram light 57pro wheels 18x10 in the rear (the fronts clear the caliper fine so i won't discuss the fronts) on the rear i have ap racing 4 piston calipers, now the wheels are at a +38 offset but because it won't clear the caliper (arg) i need to put wheel spacers on (5mm) therefore that changes the offset to what if im correct +33, now because of that i am rubbing horribly, so the problem i have here is rubbing due to the brake caliper and the wheel offset...what are my options? would a different offset solve the problem or is it the design of the wheel...as much as i want to say yea let me just switch to a different big brake kit, thats just VERY expensive, or do i need to find a completely different wheel design :( <
Follow Ups	wheel/brake problem question help - ouikikazz 21:31:14 09/17/08 look and see where exactly you are rubbing - LJZTT 22:45:14 09/17/08 .....as needed** (n/m) - LJZTT 10:48:45 09/18/08
Post a Followup	You cannot reply to this message because you are not logged in.