Subject	Manual is slim at best for info but gives good layout>>>
Posted by	ZUL8TR on September 16, 2008 at 4:30 PM
	This message has been viewed 86 times.
In Reply To	Anyone here has a link on how to change the cv boots or axle posted by elcid on September 16, 2008 at 08:17 AM
Message	of parts. I have heard that the killer is getting the splined shaft out of the rear bearing assembly. Manual says tap with brass hammer on shaft and be careful of threads. LOL the shaft is usually stuck real good and requires tenacity with PB Blaster. Try search for what others have done. I have not done the removal of the shafts. ZUL8TR in Orlando,FL
Follow Ups	Anyone here has a link on how to change the cv boots or axle - elcid 08:17:27 09/16/08 yes - 300znick 15:10:52 09/16/08 Manual is slim at best for info but gives good layout>>> - ZUL8TR 16:30:36 09/16/08
Post a Followup	You cannot reply to this message because you are not logged in.