Subject	Are you saying it engages close to the floor, or close
Posted by	TriniTT on September 08, 2008 at 9:34 AM
	This message has been viewed 109 times.
In Reply To	Clutch posted by Andreyev300 on September 06, 2008 at 03:25 PM
Message	to when the pedal is all the way out? If it's close to the floor, you should be able to adjust the clutch master rod a bit to see if that helps you out. You have to turn one nut on the rod and move the other along with it. There should be a writeup in FAQ. Also, if that doesn't work, you can try another new master cylinder. I had a similar problem to what you're having, and I had just replaced the master cylinder, and after exhausting everything possible (including a new clutch/flywheel and all new tranny bell housing hardware), I tried replacing the new master cylinder with another new one, and that solved the problem. Turns out the new master was bad too. Go figure. Fortunately those things carry a warranty. Cheers, JBrobst
Follow Ups	Clutch - Andreyev300 15:25:38 09/06/08 Re: NEED HELP Clutch acting up (n/m) - Andreyev300 16:47:46 09/06/08 Re: Clutch - forge 18:02:48 09/06/08 Re: Re: Clutch - Andreyev300 17:46:39 09/07/08 Re: Re: Re: Clutch (n/m) - Andreyev300 17:48:17 09/07/08 Are you saying it engages close to the floor, or close - TriniTT 09:34:17 09/08/08 Re: Are you saying it engages close to the floor, or close - Andreyev300 13:04:59 09/08/08 Also, it could be something in the transmission: - TriniTT 16:06:32 09/08/08
Post a Followup	You cannot reply to this message because you are not logged in.