Subject	Power Steering issue after changing high pressure line.
Posted by	ChrisMedaris on August 29, 2008 at 5:23 PM
	This message has been viewed 279 times.
Message	My ps has been leaking fluid for awhile so i decided to get the replacement line from Z1. I removed the existing metal and rubber lines that run to the rack and replaced with everything Z1 supplied. I filled the reservoir with fluid and started the car and it began to make an awkward noise. My guess is that i have air in the lines and i need to jack up the car and run it and turn the wheels left to right to get the air out. That's my guess though. Anyone else have the same issues and can point me in the right direction or confirm my assumption? Thanks Chris
Follow Ups	Power Steering issue after changing high pressure line. - ChrisMedaris 17:23:17 08/29/08 Did you use factory Nissan PS Fluid? (n/m) - Medici (NorCal) 17:43:00 08/29/08 Use Dexron Type III ATF fluid and bleed air from system - doug8867 19:11:34 08/29/08 I have changed numerous pumps and lines and it will make a - ShakaShaun(Denver) 20:09:34 08/29/08 Re: Power Steering issue after changing high pressure line. - KasbeKZ 11:16:12 08/30/08 lock to lock to lock to lock to lock to lock (n/m) - eyagel (Houston) 02:57:41 08/31/08 Re: lock to lock to lock to lock to lock to lock - KasbeKZ 11:41:38 08/31/08 No, it is to turn it from bump stop to bump stop. (n/m) - Fast300 11:58:49 08/31/08 When we say turn the wheel LOTS, we mean DOZENS! - BobbyT 07:45:06 08/31/08
Post a Followup	You cannot reply to this message because you are not logged in.