Subject	Loss of power....
Posted by	jmt-z on August 29, 2008 at 9:20 AM
	This message has been viewed 274 times.
Message	Type of car -1993 NA Symptoms -Lacks any power/torque below 3k rpm Other need to knows -Recently disconnected the EGR system. Did while in the car so EGR is still there but put block off plates on intake manifold, cut tubes down disconnected the vacuum source and plugged it. -Idles smooth -Revs smooth(all injectors are working) -Nothing else out of the ordinary other than no power Possible problems: -Big vacuum leak?? -Did I miss something when deleting the EGR?? "If everything seems under control, you're just not going fast enough." - Mario Andretti
Follow Ups	Loss of power.... - jmt-z 09:20:12 08/29/08 Re: Loss of power.... - KasbeKZ 09:39:27 08/29/08 Re: Re: Loss of power.... - jmt-z 10:08:43 08/29/08 Regapped the plug...checked all my vacuum hoses and went for - jmt-z 10:32:20 08/29/08 Re: Loss of power.... - KasbeKZ 10:45:51 08/29/08 It sounds just fine. When I step on the gas its almost - jmt-z 11:19:30 08/29/08 perhaps you have clogged catalytic converters ??? (n/m) - REDI4U 14:06:42 08/29/08 Re: perhaps you have clogged catalytic converters ??? - KasbeKZ 14:36:37 08/29/08 Ill add that to my list to check when i get under there - jmt-z 14:43:46 08/29/08 Re: Loss of power.... - KasbeKZ 14:37:56 08/29/08 Ill take a look at these too but I was under the impression - jmt-z 14:49:28 08/29/08 my guess is the clogged cats...especially if it idels fine (n/m) - REDI4U 14:57:35 08/29/08 Re: Ill take a look at these too but I was under the impression - KasbeKZ 16:21:42 08/29/08 Well it looks like my knock sensor is shot so that will be - jmt-z 16:10:15 08/29/08 Re: Well it looks like my knock sensor is shot so that will be - KasbeKZ 21:53:33 08/29/08 Well I soldered on a 1M ohm resistor and problem solved - jmt-z 14:46:17 08/30/08 Re: Well I soldered on a 1M ohm resistor and problem solved - KasbeKZ 20:13:06 08/30/08
Post a Followup	You cannot reply to this message because you are not logged in.