Subject	always gap them yourself before putting them in. (n/m)
Posted by	MJawn on August 13, 2008 at 5:06 PM
	This message has been viewed 117 times.
In Reply To	the plugs come pre gapped to .030 (n/m) posted by volcomstone550 on August 13, 2008 at 02:23 AM
Message
Follow Ups	what would cause my Z to "Break up" under full boost - volcomstone550 16:15:54 08/12/08 spark plug gap - aliaZ 16:45:07 08/12/08 Yup. Fixed this problem on by gapping down to .032" (n/m) - ThunderZ 22:05:31 08/12/08 the plugs come pre gapped to .030 (n/m) - volcomstone550 02:23:36 08/13/08 Mine did too... supposedly - sfpearl300zTT 12:52:59 08/13/08 always gap them yourself before putting them in. (n/m) - MJawn 17:06:01 08/13/08 They should be gapped at 0.030 and shouldn't blow out at - phillyz 16:58:29 08/12/08 the car runs perfect on all six cylinders (n/m) - volcomstone550 17:06:00 08/12/08 Done a vacuum leak down test? - Milo (SATX) 17:58:58 08/12/08 *ahem* ----> - Milo (SATX) 18:04:55 08/12/08 yea i am very familiar with that post. - volcomstone550 18:29:14 08/12/08
Post a Followup	You cannot reply to this message because you are not logged in.