Subject	No Start
Posted by	Evan_1990 on July 30, 2008 at 12:56 PM
	This message has been viewed 187 times.
Message	okay heres a puzzle for you guys, i have had my 90 z NA for about 4 months, i got the car not running with a no spark issue, and low compression in some cylinders, so i did a vacume test and found out it was one side of head so i replaced the whole head i also replaced the other side, so i got it back together compression is great, still no spark. so i replaced the crank angel sensor, still no spark, then i checked the ptu it was bad and so i replace it to, and yet still no spark, it turns out it was a bad conection to the ptu and no i have spark but the damm thing still wont start, i have fuel,air, and now spark what gives?!?!?!?
Follow Ups	No Start - Evan_1990 12:56:44 07/30/08 Re: No Start - allablur 14:09:26 07/30/08 Re: No Start - txq45 14:15:11 07/30/08 Does it try to turn over or just click? - doug8867 14:21:35 07/30/08 Re: Does it try to turn over or just click? (n/m) - Evan_1990 10:11:48 07/31/08 Re: Does it try to turn over or just click? - Evan_1990 10:16:50 07/31/08 Again, does it try to turn over or just click? - doug8867 12:31:31 07/31/08 Re: Again, does it try to turn over or just click? - Evan_1990 13:19:48 07/31/08 Key off. Have you checked for vacuum leaks since you - doug8867 20:04:14 07/31/08
Post a Followup	You cannot reply to this message because you are not logged in.