Subject	New development in problem...
Posted by	Fairladyaffair on June 01, 2008 at 9:55 PM
	This message has been viewed 89 times.
In Reply To	Car stutters at 2,000rpms help or should i say HELP! posted by Fairladyaffair on June 01, 2008 at 08:57 PM
Message	ok so to try and see why the bov were acting up i disconnected the bov and plugged the holes to see if they would stay shut and i would produce more rpms instead i discovered they were still pulled open despite the disconnected vacuum line...any ideas???? "Boost Is Life" [img]http://a938.ac-images.myspacecdn.com/images01/69/l_3d0a6a479e6ec7621196b8333366bde9.jpg[/img]
Follow Ups	Car stutters at 2,000rpms help or should i say HELP! - Fairladyaffair 20:57:57 06/01/08 Any codes? Like code 12? - awesom-o 20:59:57 06/01/08 Re: Any codes? Like code 12? - Fairladyaffair 21:03:12 06/01/08 Is there vacuum on the BOV's...the seafoam will clean - twinturbineZ 21:04:37 06/01/08 Re: Is there vacuum on the BOV's...the seafoam will clean - Fairladyaffair 21:09:08 06/01/08 Should run fine with the seafoam in the tank...If you put it - twinturbineZ 21:16:58 06/01/08 Re: Should run fine with the seafoam in the tank...If you put it - Fairladyaffair 21:30:43 06/01/08 I don't think that's your problem..but it won't - twinturbineZ 21:32:18 06/01/08 Re: I don't think that's your problem..but it won't - Fairladyaffair 21:35:28 06/01/08 Are you saying you feel vacuum from the BOV? - twinturbineZ 21:19:05 06/01/08 Re: Are you saying you feel vacuum from the BOV? - Fairladyaffair 21:29:18 06/01/08 if you feel vacuum from the BOV'S and it's - twinturbineZ 21:33:44 06/01/08 Re: Is there vacuum on the BOV's...the seafoam will clean - Fairladyaffair 21:33:34 06/01/08 Just unscrew them..shake them and see if the rattle - twinturbineZ 21:35:43 06/01/08 Re: Just unscrew them..shake them and see if the rattle - Fairladyaffair 22:00:01 06/01/08 Just make sure air flows in one way and not the other (n/m) - twinturbineZ 22:25:49 06/01/08 New development in problem... - Fairladyaffair 21:55:23 06/01/08 Can you remove them and reinstall the factory - twinturbineZ 22:24:53 06/01/08
Post a Followup	You cannot reply to this message because you are not logged in.