| Message |
tech doc.... 30. The AVC-R has three setting modes, A, B, and OFF so there are two different boost settings. Choose one of them and set the base boost level as desired. What actually controls the amount of boost is the duty cycle, not the boost setting. For 1 bar, try starting around 58%. Higher percentages = higher boost.31. It is a good idea to find out what the 'natural' boost is with the system off. Set the AVC-R to OFF (hit the left arrow in the selection mode). Then go to the boost monitor screen. Find a stretch of deserted road and make a wide open run in 3rd or 4th gear (4th goes to ~126 MPH). The boost monitor screen should tell what peak boost was. It should be around 0.5 - 0.65 bar (7 - 9 psi). This will show what the car will boost with no boost controller at all (Good to know). Put the AVC-R in the desired boost mode (A or B), get into 3rd or 4th gear again, and go full throttle again. If it boosts over your target amount, reduce the duty cycle and try again. If it boosts under, raise the duty cycle.
So I'm having this dream! I'm in my Z and these guys are after me, but they can't catch me...So they get a car, but they still can't catch me. So they get a plane, and just as their about to catch me....the TWIN TURBOS KICK IN! |
 |