Subject	Im pretty sure there is no air in the system but I guess I
Posted by	5280Z_nightstalker on May 27, 2008 at 8:49 AM
	This message has been viewed 121 times.
In Reply To	How many miles are on this clutch? Did you break it in posted by ThunderZ on May 27, 2008 at 06:44 AM
Message	could bleed it again just to be positive. The clutch is brand new and was bought before my build so basically has no more then 10 miles on it from cruising around the block. Zellamay: There is some free play on the top side of the clutch when I first push on the clutch and from what I know that is normal. I would say about 2 inches of free play on the top side although I need to go push it to be 100% positive and right now its early morning. It fully disengages about a inch off the floor as I said previously and starts to engage probably a inch or two from the top when pushing down. I hope that helps and I guess it does not hurt to just go play with the clutch arm and see what happens. If it gets worse you go the other way right. Was just looking to see if anyone had any idea if that is my problem or not.
Follow Ups	Need quick help about clutch. I have the Z1 clutch kit - 5280Z_nightstalker 23:51:47 05/26/08 If the pedal is causing slipping, you will not have - zellamay 00:52:34 05/27/08 How many miles are on this clutch? Did you break it in - ThunderZ 06:44:45 05/27/08 Im pretty sure there is no air in the system but I guess I - 5280Z_nightstalker 08:49:40 05/27/08 Check that the pedal has been properly adjusted - spicyZ 09:15:10 05/27/08 Hey thanks JB that did the trick and I didnt even know that - 5280Z_nightstalker 13:09:15 05/27/08 Glad to hear to fixed it. Nice job, SpicyZ. (n/m) - ThunderZ 20:43:43 05/27/08 No need to bleed. Glad it worked out for you. (n/m) - spicyZ 08:23:54 05/28/08
Post a Followup	You cannot reply to this message because you are not logged in.