Subject	Need quick help about clutch. I have the Z1 clutch kit
Posted by	5280Z_nightstalker on May 26, 2008 at 11:51 PM
	This message has been viewed 171 times.
Message	and I notice a little slipping when taking off and I am pretty sure its the adjustment on the pedal. I have bled the clutch and its staying pretty stiff but lost some feel when the car started. When the pedal is pushed in and then released it is disengaged about 1 inch from the floor maybe less. Does anyone have any ideas or comments or am I probably being to nice to the car and just need to let go of the clutch and not feed it slowly? Gears shift fine and I have no problems but it almost feels like my old Exedy stage 2 clutch for my integra where if you didnt drive it kind of like a race car (rev above 2500rpm and drop fairly quick) it would skip. Looking for some advice or if anyone can confirm my diagnosis. Thank you in advance.
Follow Ups	Need quick help about clutch. I have the Z1 clutch kit - 5280Z_nightstalker 23:51:47 05/26/08 If the pedal is causing slipping, you will not have - zellamay 00:52:34 05/27/08 How many miles are on this clutch? Did you break it in - ThunderZ 06:44:45 05/27/08 Im pretty sure there is no air in the system but I guess I - 5280Z_nightstalker 08:49:40 05/27/08 Check that the pedal has been properly adjusted - spicyZ 09:15:10 05/27/08 Hey thanks JB that did the trick and I didnt even know that - 5280Z_nightstalker 13:09:15 05/27/08 Glad to hear to fixed it. Nice job, SpicyZ. (n/m) - ThunderZ 20:43:43 05/27/08 No need to bleed. Glad it worked out for you. (n/m) - spicyZ 08:23:54 05/28/08
Post a Followup	You cannot reply to this message because you are not logged in.