Subject	Adjusting the NA clutch per FAQ write-up...still not good
Posted by	enthuZiast on May 22, 2008 at 4:22 PM
	This message has been viewed 159 times.
Message	The "grab" point of the clutch has been high and I want to lower the "grab" point via adjusting the rod. I've adjusted the clutch by rotating the rod going into and out of the clutch master cylinder in small increments and the height of the "grab" point of the clutch hasn't moved at all. The throw of the clutch pedal is getting shorter or longer after adjusting the rod so I know adjusting the rod is physically doing something, but the "grab" point is still high. To make things more hectic, the clutch is starting to slip under load going up hills but is fine on flat ground. Am I adjusting the rod correctly? or am I experiencing signs of a clutch on its way out? Thanks in advance. <<< Slow in & Fast out >>>
Follow Ups	Adjusting the NA clutch per FAQ write-up...still not good - enthuZiast 16:22:59 05/22/08 Mine did the same thing - de944 17:03:07 05/22/08 One thing I read was that the - yobobrox 17:21:58 05/22/08 The important part is how much free play you have at - Audioquest 19:48:04 05/22/08
Post a Followup	You cannot reply to this message because you are not logged in.