Subject	Re: replacing tension rod connectors...all 3 nuts are seized
Posted by	PhilupondZ on May 22, 2008 at 8:54 AM
	This message has been viewed 176 times.
In Reply To	replacing tension rod connectors...all 3 nuts are seized posted by eliteturbotuner on May 21, 2008 at 08:20 PM
Message	PB Blaster, a ratchet, a pipe, hammer, and a lot of love
Follow Ups	replacing tension rod connectors...all 3 nuts are seized - eliteturbotuner 20:20:04 05/21/08 PB Blaster is the only way to fly as far as penetrating - Audioquest 20:42:37 05/21/08 On the O2 sensors I used some freezing spray to get - jzack 20:50:53 05/21/08 PB Blaster and give it time to work, as in hours. - doug8867 21:14:21 05/21/08 Use PB Blaster, but let it sit overnight and keep spraying - ThunderZ 21:15:42 05/21/08 Re: replacing tension rod connectors...all 3 nuts are seized - PhilupondZ 08:54:22 05/22/08 ...and good command of the english language! (n/m) - Audioquest 19:53:14 05/22/08 Also try to work the fastener back and forth, not just - Gordo 93TT Daytona 19:25:27 05/23/08
Post a Followup	You cannot reply to this message because you are not logged in.