Subject	Fuel delivery problem.
Posted by	dberry on May 21, 2008 at 9:16 PM
	This message has been viewed 194 times.
Message	Maybe someone can explain how a fuel pressure regulator works. I just got done working on the lifter on my engine. I put everthing back and the engine wouldn't start. Pluged her up to the computer and recive only 55. I narrowed the problem down to fuel dilvery. The fuel pump work. I can hear it running and I can turn it on an off with the PC but I only get pressure up to the regulator and I get zero fuel past the regulator. I purchased a new regulator and I still can't get any fuel dilvery past the regulator. How does the darn thing work if it won't let fuel pass by. Does the fuel pump have to overcome it? I havn't tested the pressure of the fuel pump yet. Any help would be greatly appricated.
Follow Ups	Fuel delivery problem. - dberry 21:16:05 05/21/08 Are the injectors working/plugged in? (n/m) - MixManMash 21:46:28 05/21/08 The regulator should'nt allow fuel to pass - twinturbineZ 22:28:56 05/21/08 So if it isn't passing your pump is probably not making - twinturbineZ 22:43:33 05/21/08 You can install a fuel pressure gauge inline and check the - twinturbineZ 23:00:28 05/21/08 Ok guys, I'm an idiot and not a very good speller. - dberry 23:01:27 05/21/08 Kewl..you figured it out! (n/m) - twinturbineZ 23:06:23 05/21/08
Post a Followup	You cannot reply to this message because you are not logged in.