Subject	Need Help With Greddy Profec B
Posted by	TwinTurboZ19 on May 20, 2008 at 10:36 PM
	This message has been viewed 234 times.
Message	I recently installed a Profec B in my Z32, based on install writeups I've seen on this forum. Install was easy, but the boost controller is not raising boost at all. I even put the duty cycle all the way to 100%, but the boost never went past 11 or 12 psi. I double-checked the hose routing and hookup, and the vacuum lines are going to the correct ports on the solenoid. I also unplugged the BCS solenoids. I really have no idea why this boost controller won't turn my boost up, any suggestions?
Follow Ups	Need Help With Greddy Profec B - TwinTurboZ19 22:36:26 05/20/08 I would recommend you check for boost leaks. If you have a - MixManMash 01:04:48 05/21/08 Re: Need Help With Greddy Profec B - TwinTurboZ19 12:11:28 05/21/08 How did you mount the solenoid? - spicyZ 15:27:59 05/21/08 Re: Need Help With Greddy Profec B - Cosmik Debris 19:05:18 05/21/08 Re: Re: Need Help With Greddy Profec B - TwinTurboZ19 11:35:50 05/22/08 Please report back on whether it makes a difference (n/m) - spicyZ 14:20:44 05/22/08
Post a Followup	You cannot reply to this message because you are not logged in.