Subject	5/16 is 7.93MM, that is closer to 8MM than 6MM
Posted by	Fast300 on May 18, 2008 at 12:49 AM
	This message has been viewed 135 times.
In Reply To	Re: Automatic transmission radiator specs needed posted by txq45 on May 17, 2008 at 11:21 AM
Message	The proper size is 8MM ID, but inch size 5/16 ID can be used. 6MM ID is too small and inch size 3/8 ID being 9.5249MM is too large.
Follow Ups	Automatic transmission radiator specs needed - inferno 10:58:38 05/17/08 Re: Automatic transmission radiator specs needed - txq45 11:21:24 05/17/08 Thanks for the info! The reason why I ask is because - inferno 11:52:50 05/17/08 5/16 is 7.93MM, that is closer to 8MM than 6MM - Fast300 00:49:33 05/18/08 There are two inlet options with the Derale trans cooler - inferno 06:31:26 05/19/08 OK, but the two small pipes on the radiator are still 8MM - Fast300 14:21:47 05/19/08 You are right. I did not phrase my question correctly - inferno 16:23:52 05/19/08 The 3/8 is close enough. (n/m) - Fast300 20:30:05 05/19/08 Thanks, I appreciate the feedback. (n/m) - inferno 03:58:38 05/20/08
Post a Followup	You cannot reply to this message because you are not logged in.