Subject	Correct. No worries, it's good to be careful. The Yellow
Posted by	ThunderZ on May 11, 2008 at 7:17 PM
	This message has been viewed 152 times.
In Reply To	the Y branch doesn't apply because we don't have the posted by ZonaZ on May 11, 2008 at 01:37 PM
Message	wire from the NEO goes to Pin27 of the ECU with no Y-branch because the ECU only has 1 MAS input.
Follow Ups	Wiring dual maf w AFC NEO w Boomslang harness - ZonaZ 22:01:49 05/09/08 cut and paste.............. - twinturbineZ 00:10:11 05/10/08 right, saw it. no boomslang harness, no neo - ZonaZ 11:49:34 05/10/08 Couple of clarifications - ThunderZ 08:59:30 05/10/08 this is the boomslang with NEO sub-harness built in - ZonaZ 11:36:48 05/10/08 In the NEO wire diagram, they identify connection diagram - ZonaZ 12:58:12 05/10/08 Look at the Rb26 wiring diagram just below of the one - ThunderZ 08:28:34 05/11/08 the Y branch doesn't apply because we don't have the - ZonaZ 13:37:23 05/11/08 Correct. No worries, it's good to be careful. The Yellow - ThunderZ 19:17:54 05/11/08 JOHN....you're making this way too difficult!! - twinturbineZ 14:12:22 05/10/08 I am not using the harness that came with the NEO - ZonaZ 17:37:23 05/10/08 You got it...finally...Do you have the original - twinturbineZ 17:41:53 05/10/08 thx, just trying to nail down the blue wire, spoke to - ZonaZ 13:32:19 05/11/08 Re: thx, just trying to nail down the blue wire, spoke to - WazTTed 05:05:28 05/12/08
Post a Followup	You cannot reply to this message because you are not logged in.