Subject	promblems with LaBree HELP!!!
Posted by	cobaltgreenz32 on May 05, 2008 at 2:16 PM
	This message has been viewed 208 times.
Message	Ok, so first off, I've been driving my Z now for most of the winter with just pre-cats, as far as exhaust. We bought the fully divorced 2.5" downpipes form Labree to put on it. After getting the drivers side pre-cat off, I put the new dp on the turbo and there looked to be not enough clearance at one of the studs to be able to thread a nut on it. This is the case with both sides. The holes on the bottom of the main exhaust outlet are very close to the main pipe. There looks to be major conflict. This is all on a '95 with stock turbos. Also, just for giggles, we have to take the ps turbo off because one of the bolts twisted off in the turbo. Thanks for any help, Matt
Follow Ups	promblems with LaBree HELP!!! - cobaltgreenz32 14:16:19 05/05/08 Are you sure the DP is getting properly (and fully) seated - Dave N 15:10:52 05/05/08 Re: Are you sure the DP is getting properly (and fully) seated - cobaltgreenz32 16:27:15 05/05/08 Re: Are you sure the DP is getting properly (and fully) seated - cobaltgreenz32 16:30:27 05/05/08 You need to upload the picture from your computer to an - Dave N 16:51:59 05/05/08 Contact labree. (n/m) - Spongerider :) 15:17:03 05/05/08
Post a Followup	You cannot reply to this message because you are not logged in.