Subject	Still having trouble getting 1st gear in when the
Posted by	frostedflakepnoy on May 01, 2008 at 12:26 PM
	This message has been viewed 134 times.
Message	drive train heats up. more so after 30 minutes of driving. I tried bleeding all the lines, still nothing, tried adjusting the clutch but its turned all the way. the clutch has less than 10k on it. any other ideas?
Follow Ups	Still having trouble getting 1st gear in when the - frostedflakepnoy 12:26:37 05/01/08 bad synchros? (n/m) - SC300Z 12:36:37 05/01/08 Any opinions on the 98+ tranny over OEM? (n/m) - frostedflakepnoy 12:40:13 05/01/08 I've heard from a few that they are better. (n/m) - SC300Z 12:50:18 05/01/08 When going into first, you have to be virtually stopped or - Audioquest 13:40:05 05/01/08 Its only when im stopped, when im slightly rolling 1st gear - frostedflakepnoy 13:56:36 05/01/08 Does it grind when you have a hard time shifting into first? - Audioquest 14:20:52 05/01/08 The shift is not sloppy or grinding, it feels like its - frostedflakepnoy 14:23:56 05/01/08 How far do you have to let the pedal up in first before - Audioquest 16:47:16 05/01/08 Your problem may be your clutch - njz 21:13:25 05/01/08 mine is just the opposite of your problem. - RedSER13 12:53:54 05/02/08
Post a Followup	You cannot reply to this message because you are not logged in.