Subject	SBC i-D III Not powering on
Posted by	msmith on May 01, 2008 at 8:37 AM
	This message has been viewed 152 times.
Message	I have the SBC i-D III and the Power meter ID installed in my z. It always worked fine and turned on everytime i turned the car on BUT for some reason this morning driving to work the SBC ID DID NOT turn on....the power meter turned on but the boost controller seems to be getting NO power...anyone know why this might be? I've never had any problems with it turning on in the past..I bought the car with it installed so i dont know much about how it hooks up. I was thinking a fuse or a ground or positive came loose? Help me out! Thanks alot guys 1990 300zx TT
Follow Ups	SBC i-D III Not powering on - msmith 08:37:32 05/01/08 Re: SBC i-D III Not powering on (n/m) - msmith 15:04:22 05/01/08 Re: SBC i-D III Not powering on - msmith 15:49:31 05/01/08 Check the power wire, may have come loose (n/m) - .z 23:20:55 05/01/08 Re: Check the power wire, may have come loose - msmith 08:27:49 05/02/08 One of four things - spicyZ 09:41:29 05/02/08 Re: One of four things - msmith 11:46:23 05/02/08 And one more. Make sure the connectors are 100% - Audioquest 17:44:11 05/02/08
Post a Followup	You cannot reply to this message because you are not logged in.