Subject	wiring question old vs new inj. clips
Posted by	lay-z on May 01, 2008 at 6:36 AM
	This message has been viewed 177 times.
Message	Upgrading from old style injector clips to pintle-less injector clips (new injectors too of course), and looking at the wires coming from my current wiring harness that go to the injector clips, there is one larger white wire with a black stripe and one smaller blue wire. On the new pintle-less injector clips, the smaller diameter wire is striped and the larger is plain. When splicing new clips onto the old harness, should I connect large to large and small-small or large striped to small striped ect..? They seem to be the same colors wire (white large/blue small on both old harness/new inj clips) but the stripe is switched up.. I hope this question is clear, thanks very much! I'll post pics if my car will start today :)
Follow Ups	wiring question old vs new inj. clips - lay-z 06:36:27 05/01/08 splice large to large, small to small. (n/m) - doug8867 08:04:00 05/01/08 It doesn't matter. (n/m) - Woody75 (Denver) 08:46:00 05/01/08 Is a match-up of size important at all, or can some be - ThunderZ 06:33:09 05/02/08 Yes it's important, otherwise they'd make all wire the same - doug8867 06:49:46 05/02/08 Yep - you've got it right.... (n/m) - jzack 22:10:27 05/02/08 Again, it doesn't matter. - Woody75 (Denver) 11:23:12 05/02/08 2nd, I had my injectors wired both ways on the same - robo (sebring1970) 10:38:45 05/03/08
Post a Followup	You cannot reply to this message because you are not logged in.