Subject	not sure
Posted by	gt300zxtt on April 21, 2008 at 9:03 AM
	This message has been viewed 283 times.
In Reply To	question ..if it was the TB linkage wouldn't the RPM posted by The Devils Z on April 21, 2008 at 06:04 AM
Message	but the problem with the throttle linkage not returning is upon lightly letting of the accelerator or cable. after that, one can push down on the linkage to get it to return to 0 degrees displacement, and everything would act as normal.
Follow Ups	high idle - 1800 RPM question - The Devils Z 18:43:12 04/20/08 Try checking the vent tubes attached to the valve covers - Agner.S(CT) 19:27:16 04/20/08 The only thing that strikes me would be a faulty TPS - en5 19:28:56 04/20/08 2nd. Sometimes the connector for the switch part of the - MixManMash 12:04:48 04/21/08 Wouldn't the TPS voltage be off at idle at that was the - The Devils Z 12:38:43 04/21/08 looks like you may be right on ... (n/m) - The Devils Z 14:43:03 04/21/08 Re: high idle - 1800 RPM question - 300twinz (satx) 19:31:49 04/20/08 i had this issue, although it was due to - inf 19:37:48 04/20/08 Is your Air Regulator working?..vacuum leak? (n/m) - Audioquest 19:42:22 04/20/08 Re: Is your Air Regulator working?..vacuum leak? - The Devils Z 19:48:47 04/20/08 yes --the Throttle body linkage is one of the first things - The Devils Z 19:47:48 04/20/08 mine snapped back too - inf 21:02:56 04/20/08 try slowly letting off of the cable to see if it returns - gt300zxtt 22:53:40 04/20/08 using pic from faq - gt300zxtt 22:58:46 04/20/08 question ..if it was the TB linkage wouldn't the RPM - The Devils Z 06:04:11 04/21/08 not sure - gt300zxtt 09:03:51 04/21/08 possible solution ...the TPS in closed mode --which means - The Devils Z 14:17:54 04/21/08 Hey Devil, had the same weird problem too... - escturbo 06:45:11 04/22/08 look here .. - The Devils Z 07:50:24 04/22/08 SOLUTION FOUND ... it turns out idiot me put one of the - The Devils Z 20:34:00 04/22/08
Post a Followup	You cannot reply to this message because you are not logged in.