Subject	try slowly letting off of the cable to see if it returns
Posted by	gt300zxtt on April 20, 2008 at 10:53 PM
	This message has been viewed 236 times.
In Reply To	yes --the Throttle body linkage is one of the first things posted by The Devils Z on April 20, 2008 at 07:47 PM
Message	it is very easy for it to snap back when there is a large angular displacement and quick roll rate. if the plastic spacers inside the larger outer spring have disintegrated or do not exist, then the spring will distort and upon an angular displacement of the throttle body, the spring will displace angularly and linearly...basically it will shift to one side and not turn in a perfect circle. there is a spacer on each side of the larger spring to help it keep shape/roundness.
Follow Ups	high idle - 1800 RPM question - The Devils Z 18:43:12 04/20/08 Try checking the vent tubes attached to the valve covers - Agner.S(CT) 19:27:16 04/20/08 The only thing that strikes me would be a faulty TPS - en5 19:28:56 04/20/08 2nd. Sometimes the connector for the switch part of the - MixManMash 12:04:48 04/21/08 Wouldn't the TPS voltage be off at idle at that was the - The Devils Z 12:38:43 04/21/08 looks like you may be right on ... (n/m) - The Devils Z 14:43:03 04/21/08 Re: high idle - 1800 RPM question - 300twinz (satx) 19:31:49 04/20/08 i had this issue, although it was due to - inf 19:37:48 04/20/08 Is your Air Regulator working?..vacuum leak? (n/m) - Audioquest 19:42:22 04/20/08 Re: Is your Air Regulator working?..vacuum leak? - The Devils Z 19:48:47 04/20/08 yes --the Throttle body linkage is one of the first things - The Devils Z 19:47:48 04/20/08 mine snapped back too - inf 21:02:56 04/20/08 try slowly letting off of the cable to see if it returns - gt300zxtt 22:53:40 04/20/08 using pic from faq - gt300zxtt 22:58:46 04/20/08 question ..if it was the TB linkage wouldn't the RPM - The Devils Z 06:04:11 04/21/08 not sure - gt300zxtt 09:03:51 04/21/08 possible solution ...the TPS in closed mode --which means - The Devils Z 14:17:54 04/21/08 Hey Devil, had the same weird problem too... - escturbo 06:45:11 04/22/08 look here .. - The Devils Z 07:50:24 04/22/08 SOLUTION FOUND ... it turns out idiot me put one of the - The Devils Z 20:34:00 04/22/08
Post a Followup	You cannot reply to this message because you are not logged in.