Subject	There is a simple 1 meg. ohm resistor by-pass procedure
Posted by	Zirvana on April 18, 2008 at 3:05 PM
	This message has been viewed 183 times.
In Reply To	engine problem posted by Jaskozx on April 17, 2008 at 08:46 PM
Message	to resolve the detonation sensor problem until you can get around to replacing the sensor, or you relocate another sensor. Procedures available here at TT.Net for doing both. You can splice on new connectors on your FI harness to save considerable time and money compared to replacing the whole harness. For 1994 and earlier models we often use the FI connectors for the Nissan Maxima (can be purchased from Coz, a TT.Net sponsor). Bigger injectors need other upgrades to take advantage of their cabability. I did not check out your car's profile, but there are other mods that typically come first before bigger injectors. Good luck, Jim
Follow Ups	engine problem - Jaskozx 20:46:31 04/17/08 first confirm it is your injectors - Ahmed 22:12:31 04/17/08 Det Sensor wiring breakage is a pretty common issue - jzack 22:22:56 04/17/08 There is a simple 1 meg. ohm resistor by-pass procedure - Zirvana 15:05:56 04/18/08
Post a Followup	You cannot reply to this message because you are not logged in.