Subject	first confirm it is your injectors
Posted by	Ahmed on April 17, 2008 at 10:12 PM
	This message has been viewed 185 times.
In Reply To	engine problem posted by Jaskozx on April 17, 2008 at 08:46 PM
Message	try cleaning the green stuff off of them first...then you can test them by doing an ohm test on them using a multimeter...they should ohm between 10-14 ohms if you have to replace your injectors, it is best to upgrade to the NEW STYLE injectors to avoid the continuing ethanol problem killing injectors...get the 300 degree fuel rails and new style nismo 740cc or 615cc injectors it is possible to change the harness with the engine still in, but i hear its a pain in the ass
Follow Ups	engine problem - Jaskozx 20:46:31 04/17/08 first confirm it is your injectors - Ahmed 22:12:31 04/17/08 Det Sensor wiring breakage is a pretty common issue - jzack 22:22:56 04/17/08 There is a simple 1 meg. ohm resistor by-pass procedure - Zirvana 15:05:56 04/18/08
Post a Followup	You cannot reply to this message because you are not logged in.