Subject	Swapped brake rotors, now I can't move
Posted by	roninknight7 on April 14, 2008 at 12:40 AM
	This message has been viewed 196 times.
Message	I have a 1990 2+2 with cross-drilled/slotted rotors up front, and a 1990 TT with regular rotors up front. I did a rotor swap, only the front rotors. Now the 2+2 have regular rotors and the TT have the cross-drilled/slotted rotors. Both pairs of rotors are 30mm. I haven't put the calipers back on the TT yet (planning to paint the calipers), but I did put back the calipers for the 2+2. I then bled the brakes for the 2+2, both front driver and front passenger. When I turned on the ignition of the 2+2, I can't even move, the brakes seems like its engaged. But the brake pedal feels normal. Any ideas what the problem could be? Should I bleed again? Thanks!
Follow Ups	Swapped brake rotors, now I can't move - roninknight7 00:40:13 04/14/08 90 N/A had 26mm calipers. All TT's had 30mm caliper. - Devi13 02:05:18 04/14/08 Yes, Switch them back or buy another pair of 30mm Calipers. (n/m) - nonstopna 20:49:16 04/17/08
Post a Followup	You cannot reply to this message because you are not logged in.