Subject	Re: :Has anyone ever put a breaker bar on the crank pulley,
Posted by	KasbeKZ on March 19, 2008 at 6:41 PM
	This message has been viewed 113 times.
In Reply To	:Has anyone ever put a breaker bar on the crank pulley, and posted by Woodman on March 17, 2008 at 03:03 PM
Message	there's no need. you have the breaker bar yes? i just put a 4-ft (over kill) exhuast pipe on it and it came off with little more then a lean. when putting it back on, i am able to get it tight again with an un-assisted torque wrench. what i'm saying is, i wouldn't take the risk for so little gain unless it is really rusty or something
Follow Ups	:Has anyone ever put a breaker bar on the crank pulley, and - Woodman 15:03:58 03/17/08 I haven't before, nor would I ever do that - ZEngineer 15:06:25 03/17/08 You can prop it against the ground if you get a long enough - TT XTZ 15:15:21 03/17/08 i have done it several times. worked every time for me. - kickerzx 15:35:15 03/17/08 Breaker bar, with cheater pipe and hit with mallet. (n/m) - Audioquest 15:56:26 03/17/08 Why don't you go in 4th or 5rd gear and pull the parking - Dark Diver 16:06:03 03/17/08 auto tranny. (n/m) - Woodman 04:11:00 03/18/08 I have done it a bunch of times on a bunch of cars - jcieslik 17:27:18 03/17/08 Works good but you run the risk of breaking the front snout - Spddracer 20:44:13 03/17/08 Many times, always works. Make sure you protect the - zellamay 21:04:44 03/17/08 hahaha. I've done that on an 2G MX-6 LS V6. It was the - MixManMash 22:00:43 03/17/08 I've done it on a sentra before, but i haven't had the need - spyhunterTT + 93Vert(nj) 17:01:00 03/18/08 Re: :Has anyone ever put a breaker bar on the crank pulley, - KasbeKZ 18:41:33 03/19/08
Post a Followup	You cannot reply to this message because you are not logged in.