Subject	Just a guess
Posted by	de944 on January 15, 2008 at 3:44 PM
	This message has been viewed 180 times.
In Reply To	Checking and adjusting the timing : 30°... serious problem ? posted by Dark Diver on January 15, 2008 at 03:41 PM
Message	I have heard that reading timing from the ptu loop can give false readings. Try checking your timing readings from the #1 cylinder, and see if it is the same. Hope this helps
Follow Ups	Checking and adjusting the timing : 30°... serious problem ? - Dark Diver 15:41:05 01/15/08 Just a guess - de944 15:44:54 01/15/08 From a previous thread, it seems to be either accurate - Dark Diver 16:31:27 01/15/08 I'd say the loop is accurate as Nissan put it there for that - Audioquest 16:33:53 01/15/08 Coil Pack plugs swapped? Did you maybe relocate the - Audioquest 16:04:41 01/15/08 Inside... - Dark Diver 16:28:07 01/15/08 Ok, well it's not an obvious issue, so I thought I'd - Audioquest 16:36:23 01/15/08 Try the sparkplug wire method, as per my previous reply. - Inzane 16:50:44 01/15/08 I did it... and it works ! Nice. Thanks. (n/m) - Dark Diver 14:28:02 01/19/08 Be sure you're holding the timing light at the correct angle - TTFairladyZ 21:02:54 01/15/08 Yes I already read this post, and I don't think a parallax - Dark Diver 04:13:40 01/16/08 Flip the timing gun connector over. (n/m) - Woody75 (Denver) 08:34:54 01/16/08 I'll try that tomorrow. (n/m) - Dark Diver 16:24:42 01/16/08 I did some other tests today : it appears that my timing gun - Dark Diver 03:13:33 01/17/08
Post a Followup	You cannot reply to this message because you are not logged in.