Subject	If you want stainless lines, do it right w/ AN fittings, etc
Posted by	boileralum on April 01, 2007 at 11:05 AM
	This message has been viewed 268 times.
In Reply To	with stainless sleaving you won't cut in to the hose at all (n/m) posted by DarkZide on March 31, 2007 at 11:36 AM
Message	Sleeve kits are ghetto, and I also wouldn't trust torquing a clamp over the sleeve and a rubber line underneath. Rule #1 - There's always a bastard! JRH(KY): for some reason, when I hear the word 'tranny' I think of transvestite before I do transmission. don't ask me why boileralum: FAGMO! ----------------------------------------- Bill (ImTheDevil): blah blah blah me: Just because you are covered in gasoline right now, doesn't mean you are right! ----------------------------------------- JRH (KY): I'm also using up a weekend this month for Indy and a weekend next month for the USGP. Throw in our trip to PA and GF is getting tired of my car habit. Boy I'm going to miss her :-D
Follow Ups	Fuel line 101..... - DarkZide 23:19:01 03/30/07 Nice, vtf (n/m) - ArubaDave 23:28:41 03/30/07 Very useful info, VTF... (n/m) - Eishozzzz 23:32:28 03/30/07 Very nice VTF - BlackTT91 23:37:12 03/30/07 well if you are just replacing the upper lines without - DarkZide 23:42:54 03/30/07 correction on the ideal clamps. I posted the link to 9/16 - DarkZide 23:38:25 03/30/07 there are also two 8" or so evil sections hidden under the - ZEngineer 23:40:40 03/30/07 yep they measure at 6inches each and they are not usually as - DarkZide 23:47:50 03/30/07 there's a heat shield protecting those two hoses - ZEngineer 23:57:59 03/30/07 I normally change customer cars - spyhunterTT(nj) 08:38:20 03/31/07 Very helpful, thanks for this. (n/m) - CatnipZ 23:55:45 03/30/07 cant vtf its in general.. but nice info - nemo1080 00:45:36 03/31/07 ...there we go! (n/m) - nemo1080 15:33:18 03/31/07 Very good, I like the stainless covering idea too. Goodyear - WildBillZx 01:51:54 03/31/07 Nice but you have the wrong kind of hose clamps for - Crim 07:46:54 03/31/07 Nice info, but I agree w/ Crim that you should not use - boileralum 08:56:45 03/31/07 with stainless sleaving you won't cut in to the hose at all (n/m) - DarkZide 11:36:47 03/31/07 If you want stainless lines, do it right w/ AN fittings, etc - boileralum 11:05:55 04/01/07 Nice info. Keep in mind that the TT will produce more than - Ash's Z 08:58:19 03/31/07 Awesome, VTF (n/m) - stockplayerz(nyc) 10:09:37 03/31/07 Re: Fuel line 101..... - ouikikazz 12:09:52 03/31/07 reposted in tech (n/m) - DarkZide 13:33:54 03/31/07 nice job - mossyoak 14:15:57 03/31/07 One thing to add about the protected (armored) hoses ... - jzack 11:48:32 04/03/07
Post a Followup	You cannot reply to this message because you are not logged in.