TwinTurbo.NET: Nissan 300ZX forum - Momo steering wheel install for those that give a shat-->>
People Seeking Info
 
   


     
Subject Momo steering wheel install for those that give a shat-->>
     
Posted by jamcru on September 02, 2003 at 9:11 AM
  This message has been viewed 714 times.
     
     
Message I purchased a Momo wheel (locally) 3 months ago along with a HUB from UAS in Australia. Hub shows up and it's the wrong one.
Idiots sent me a hub for a non turbo and it did not have provisions for the HICAS. Long story short, the correct hub is on back order
and the guys at AUS stopped returning my emails. Took hub to buddies machine shop and reduced hub diameter until it fit inside HICAS
ring. Only down side was I had to cut the stock cruise control/horn cable from my steering wheel as the non turbo hub does not use a plug.
Connected the wires up and bolted the wheel on. I like this HUB as the buttons for the cruise are on the top of the adapter. This in turn allows
you to use the horn button that came with the wheel. And I really like this horn button for some reason.

Enjoy!

PS knee bolster is not attached and wires are exposed from alarm.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.