Subject	Ok here is the good news
Posted by	Carlos Ramirez on August 30, 2003 at 9:41 AM
	This message has been viewed 43 times.
In Reply To	Offset for 18" front wheels posted by TwinTurboPete on August 30, 2003 at 01:31 AM
Message	You get some extra strength extra long studs. I used the H&R hubcentric spacer kit. I had to replace the studs on the hub and I am using a 20mm spacer on my front wheels. I could probably cut down to a 15mm if I wanted to.
Follow Ups	Offset for 18" front wheels - TwinTurboPete 01:31:36 08/30/03 Here is my off set and it's flush with my front fender. - 1BADTTZ 01:45:10 08/30/03 you can use spacers up to about 4 or 5 mm and still be safe - ZEngineer 01:48:25 08/30/03 Whats the correct offset to use for 18 * 8.5/9.5? (n/m) - Malukalu99 09:37:59 08/30/03 I'm running 28mm offset on my 18"x8.5" C2's. - dilo 03:42:39 08/30/03 Ok here is the good news - Carlos Ramirez 09:41:54 08/30/03 How much would it be to get longer studs? - dlaw300z(Austin) 13:20:49 08/30/03 its centering ring and you get new studs for it - Carlos Ramirez 19:04:56 08/30/03
Post a Followup	You cannot reply to this message because you are not logged in.