| Message |
Ever since I pulled my AIV/PRVR systems out, I've been on this simplification campaign. The Z32 engine bay is WAY too complex, and could easily be simplified. I'd like to see some of the techniques standardized and posted for the rest of us to follow. Think of it: on a stock configuration Z, the PCV valves take 30mins (min) to 2 hours (tops) to change out. In that configuration, it would literally take 5 minutes. Awesome!
 "So I nailed it, took off like an F18 from carrier. Of course the chase begained." -Tim_N/A 04/07/03 "You're right, oil filtration is not important. From now on, I'm using a balled up sock in a soup can." -Spee 05/09/03 |
 |