| We pulled the bottom end apart this afternoon. After a cursory look, here is the obvious (we will post pictures soon so everyone can get a good look at what I am describing): 1). No signs of detonation. No pitting in the pistons, or anywhere in the combustion chamber. 2). Bearings on #3 and #4 are TOAST. Bearings on #1, #2, #5, & #6 all headed South as well. Pitiful to look at really. 3). The machine shop that will be doing my work will be getting the bottom end in the A.M. They will provide me feedback as to what was the cause of this unfortunate mishap. 4). Lastly, as long as my heads are off, I am going to get them tested on a flow bench and will post those numbers soon as well.
Bryan
 |
