| Message |
Ed(Toronto) posted this over in the Technical forum. I don't know the source or the applications but I figured I'd post it here to get some open discussion about it. By no means is this meant to be flamebait to Ed if something isn't 100% accurate...I just wanted to put it here for people to see and to talk about (that is, IF there is anything to talk about). If it's old news, I apologize...but if any of you tell me REPOST and then look at the number of hits I have here in 3 years, you'll understand the mantra "Not everyone can see every post all of the time" :) Here it is cut and pasted (thanks again Ed): Turbo comparison sorted by maximum expected power: HKS GT3037
- Standard flow 695 cfm, 48.0 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 709 cfm, 49.0 lb/min, 2.4 Pressure Ratio, 1.4 bar, 19.9 psi, at 60 % efficiency
- Expected power 49.0 lb/min x 20 = 980 hp crank, 804 rwhp TD06H-20G
- Standard flow 640 cfm, 44.2 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 68 % efficiency
- Maximum flow 680 cfm, 47.0 lb/min, 2.3 Pressure Ratio, 1.3 bar, 18.5 psi, at 68 % efficiency
- Expected power 47.0 lb/min x 20 = 940 hp crank, 771 rwhp PE1820
- Standard flow 611 cfm, 42.2 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 611 cfm, 42.2 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Expected power 42.2 lb/min x 20 = 844 hp crank, 692 rwhp HKS GT2540
- Standard flow 579 cfm, 40.0 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 608 cfm, 42.0 lb/min, 2.3 Pressure Ratio, 1.3 bar, 18.5 psi, at 60 % efficiency
- Expected power 42.0 lb/min x 20 = 840 hp crank, 689 rwhp HKS GT2835
- Standard flow 543 cfm, 37.5 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 593 cfm, 41.0 lb/min, 2.7 Pressure Ratio, 1.7 bar, 24.2 psi, at 60 % efficiency
- Expected power 41.0 lb/min x 20 = 820 hp crank, 672 rwhp TD05H-16G Large
- Standard flow 512 cfm, 35.4 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 560 cfm, 38.7 lb/min, 2.7 Pressure Ratio, 1.7 bar, 24.2 psi, at 60% efficiency
- Expected power 38.7 lb/min x 20 = 774 hp crank, 635 rwhp TD05H-16G Small
- Standard flow 520 cfm, 35.9 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 525 cfm, 36.3 lb/min, 2.4 Pressure Ratio, 1.4 bar, 19.9 psi, at 60% efficiency
- Expected power 36.3 lb/min x 20 = 726 hp crank, 595 rwhp PE1420
- Standard flow 473 cfm, 32.7 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 509 cfm, 35.2 lb/min, 2.9 Pressure Ratio, 1.9 bar, 27.0 psi, at 60 % efficiency
- Expected power 35.2 lb/min x 20 = 704 hp crank, 577 rwhp HKS GT2530
- Standard flow 434 cfm, 29.9 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 65 % efficiency
- Maximum flow 477 cfm, 33.0 lb/min, 2.3 Pressure Ratio, 1.3 bar, 18.5 psi, at 65 % efficiency
- Expected power 33.0 lb/min x 20 = 660 hp crank, 541 rwhp TD04H-15C
- Standard flow 428 cfm, 29.6 lb/min, 2.0 Pressure Ratio, 1.0 bar, 14.2 psi, at 60 % efficiency
- Maximum flow 450 cfm, 31.1 lb/min, 2.3 Pressure Ratio, 1.3 bar, 18.5 psi, at 60 % efficiency
- Expected power 31.1 lb/min x 20 = 622 hp crank, 510 rwhp
My 300Zs: www.zheaven.com - Have a question about either of my 300ZXs? Answers lie within.
Admin: www.350ZForum.com - Your source for the lastest info on the new Nissan 350Z!
Writer: www.SportZMagazine.com - Nothing but Z cars from cover to cover! Subscribe today!
Moderator: www.TwinTurbo.net - Hands down, the best site for 90-96 Z car info and discussion! |
 |
